Roller door types · WS11

Manual roller garage doors in Cannock

Manual roller doors are the lowest-cost route to a roller garage door, and we can fit them in Cannock and throughout WS11. Each price includes removing your old roller or up-and-over door, and a free survey confirms the measurements first.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Cannock, WS11, WS12 and WS6
Area: Staffordshire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Cannock?

Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
If the door is for a lock-up or garage court, list each opening separately, as every door is measured and priced for its own opening.
Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.
Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.

How does it work in Cannock?

When you accept the quote, we confirm your fitting date in writing, based on installer availability. Nothing is ordered until the written quote has been agreed.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Cannock?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Cannock and nearby

If your garage is in Cannock (WS11, WS12 and WS6), you can get a guide price online now, and we confirm any survey or visit date in writing. Cannock is about 9 miles from Stafford.

Nearby, we also take enquiries from Burntwood, Bloxwich and Rugeley.

Rules that apply in Cannock

Structural work

Widening the opening, removing a central pier or fitting a new lintel is structural work that needs Building Regulations approval from building control before it starts.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Manual roller garage doors in Cannock: questions

Do you charge more for Cannock than other towns in Staffordshire?

No. Guide prices are the same for Cannock as for anywhere else we cover in Staffordshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

What do you check at a survey in WS11?

At a survey in WS11 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

How long does it take to fit a roller garage door in Cannock?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can I get a price for Cannock without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Can a manual roller door be converted to electric later?

Only if the existing door is right for it. A manual-to-electric conversion needs the curtain, barrel, box and guides to be sound and compatible with a tubular motor, and a power supply has to be added near the box. We check all of this at a free survey. If the door isn't suitable, we'll tell you plainly and price a new electric door.