Roller door types · WS13

Manual roller garage doors in Lichfield

Need a simple manual roller garage door in Lichfield? We supply and fit spring-assisted single-skin doors in Staffordshire, with no power supply needed, and you can see a guide price for your opening online before booking a free survey.

Get my guide price Call 0800 088 6248

Guide price: from £895 inc VAT
First step: Free survey
Covers: Lichfield, WS13 and WS14
Area: Staffordshire

White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel drive

Computer-generated image

What should I know about manual roller garage doors in Lichfield?

Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.
Check whether the garage has power, because a manual door needs none, while converting to electric later would need a supply near the box.
Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.
Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.

How does it work in Lichfield?

Start with the online quote tool by choosing a manual door and entering the width and height of your opening. The guide price includes fitting and taking away your old door.

STEP 01
Guide price
Answer four quick questions online and see a price range for your opening.
STEP 02
Free survey
We measure the opening, headroom, side room, lintel and power, and talk through options.
STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
STEP 04
Fitting day
Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Lichfield?

Item	Guide price (inc VAT)	Ex VAT
Manual roller door, single opening up to 2.4 m	£895–£1,295	£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m	£1,095–£1,545	£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m	£1,395–£1,995	£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Lichfield and nearby

Lichfield is within the area we cover in Staffordshire. Homes in WS13 and WS14 get the same survey, quote and fitting process as everywhere else we work. Lichfield lies around 15 miles from Stafford.

Looking from a neighbouring town? We also cover Burntwood (4 miles) and Tamworth (6 miles).

Rules that apply in Lichfield

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Planning

Replacing a garage door is not usually development that needs planning permission. Check first if your home is listed (listed building consent covers works that affect its character), sits in a conservation area with an Article 4 direction, or is on an estate where planning conditions or covenants control garage doors.

Manual roller garage doors in Lichfield: questions

How long does it take to fit a roller garage door in Lichfield?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Is the survey in Lichfield really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

Do you cover Lichfield?

Yes. Lichfield is part of the area we cover in Staffordshire, including WS13 and WS14. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do I need permission for a new roller garage door in Lichfield?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Can a manual roller door be converted to electric later?

Only if the existing door is right for it. A manual-to-electric conversion needs the curtain, barrel, box and guides to be sound and compatible with a tubular motor, and a power supply has to be added near the box. We check all of this at a free survey. If the door isn't suitable, we'll tell you plainly and price a new electric door.