Call 0800 088 6248

Roller door types · TW16

Manual roller garage doors in Sunbury-on-Thames

Need a simple manual roller garage door in Sunbury-on-Thames? We supply and fit spring-assisted single-skin doors in Surrey, with no power supply needed, and you can see a guide price for your opening online before booking a free survey.

Guide price
from £895 inc VAT
First step
Free survey
Covers
Sunbury-on-Thames, TW16, TW17 and TW15
Area
Surrey
White manual roller garage door with a centre lock on a detached brick garage at the end of a gravel driveComputer-generated image

What should I know about manual roller garage doors in Sunbury-on-Thames?

  • Ask how the bottom-rail lock works and where the keys will be kept, since the lock is what secures a closed manual door.
  • Bear in mind that manual doors suit narrower openings best, and wider curtains get heavier to lift even with spring assistance.
  • Look at the reveals on each side for solid masonry, because the guide rails need roughly 75 to 100 mm of wall to fix to.
  • Think about who will open the door and how often, since a manual curtain has to be lifted and pulled down by hand every time.

How does it work in Sunbury-on-Thames?

We then book a free survey in Sunbury-on-Thames to measure the headroom and side room and to check the lintel and floor. You get a written quote showing the door, finish and total price with VAT.

  1. STEP 01

    Guide price

    Answer four quick questions online and see a price range for your opening.

  2. STEP 02

    Free survey

    We measure the opening, headroom, side room, lintel and power, and talk through options.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Old door out, new door in, commissioned and handed over with the paperwork.

How much do manual roller garage doors cost in Sunbury-on-Thames?

ItemGuide price (inc VAT)Ex VAT
Manual roller door, single opening up to 2.4 m£895–£1,295£745.83–£1,079.17 + VAT
Manual roller door, wide single 2.4–3.0 m£1,095–£1,545£912.50–£1,287.50 + VAT
Manual roller door, double 3.0–4.0 m£1,395–£1,995£1,162.50–£1,662.50 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Sunbury-on-Thames and nearby

If your garage is in Sunbury-on-Thames (TW16, TW17 and TW15), you can get a guide price online now, and we confirm any survey or visit date in writing. Sunbury-on-Thames lies around 14 miles from Guildford.

Other places close to Sunbury-on-Thames that we cover include Walton-on-Thames, Hampton and Hanworth.

Rules that apply in Sunbury-on-Thames

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Manual roller garage doors in Sunbury-on-Thames: questions

Do I need permission for a new roller garage door in Sunbury-on-Thames?

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Do you cover Sunbury-on-Thames?

Yes. Sunbury-on-Thames is part of the area we cover in Surrey, including TW16, TW17 and TW15. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can you remove my old garage door in Sunbury-on-Thames?

Yes. Every door price includes removing and disposing of an old roller or up-and-over door at your Sunbury-on-Thames address, along with standard fixings and making good to the reveals. If the frame or lintel needs work, we price it at the survey before you agree.

How long does it take to fit a roller garage door in Sunbury-on-Thames?

Most single domestic roller doors are fitted in a day once the door has been made, including removing the old door. Wider doors, conversions that need building work and jobs where power has to be run can take longer; the quote says what to expect.

Can I fit a manual roller door to a garage with no electricity?

Yes, and that's one of its main advantages. A manual door needs no motor, no control box and no power supply, so it suits detached garages, lock-ups and outbuildings without electrics. If you want an electric door there later, a qualified electrician would need to provide a fused spur, which adds cost and depends on getting a supply to the garage.

Is a manual roller door a good fit for a garage court or lock-up?

Often, yes. Manual roller doors are practical for private garage courts and lock-ups owned by landlords, residents' associations or management companies, especially where individual garages have no power. We can survey and price several doors together, and each opening is measured separately so every door is made for its own opening.

Other roller door services in Sunbury-on-Thames

Manual roller garage doors in Sunbury-on-Thames

See a guide price in four steps, then book a free survey.

CallGuide price