Fitting, replacement and upgrades · BH23
Manual to electric roller door conversion in Christchurch
Converting a roller door to electric in Christchurch means more than adding a motor. Every door we convert for homes in Dorset gets safety devices, force testing to BS EN 12453 and a Declaration of Conformity at handover.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Christchurch, BH23, BH6 and BH7
- Area
- Dorset
Computer-generated image
What should I know about manual to electric roller door conversion in Christchurch?
- Wall keypads, key switches and smart app control can be added to a conversion as separate, priced options.
- Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
- A manual override lets you open the converted door in a power cut, and a battery backup unit can be added.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
How does it work in Christchurch?
Get a guide price online for converting your manual roller door. Then book a free survey at your home in Christchurch.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Christchurch?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Christchurch and nearby
We survey and fit roller garage doors across Christchurch, including BH23, BH6 and BH7, as part of our coverage in Dorset. For reference, Christchurch sits roughly 28 miles from Dorchester.
We also cover Bournemouth (4 miles), New Milton (5 miles) and Poole (9 miles).
Rules that apply in Christchurch
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Christchurch: questions
What do you check at a survey in BH23?
At a survey in BH23 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Can I get a price for Christchurch without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you charge more for Christchurch than other towns in Dorset?
No. Guide prices are the same for Christchurch as for anywhere else we cover in Dorset. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Is an electric roller door worth it for a garage in Christchurch?
That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Christchurch garage so you can compare.
Will I still be able to open the door by hand?
Not in the way you do now, because the motor holds the curtain in place. Most electric roller doors have a manual override, usually an internal crank or winding handle, for use in a power cut. A battery backup unit can also be added so the door runs for a limited number of cycles when the power is off.
Do I need an electrician for a conversion?
An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.
Other roller door services in Christchurch
Electric doors in Christchurch
Remotes and keypads in Christchurch
Battery and safety in Christchurch
Manual doors in Christchurch
Vision and vent laths in Christchurch
Double and wide doors in Christchurch
Installation in Christchurch
Repairs in ChristchurchManual to electric roller door conversion in Christchurch
See a guide price in four steps, then book a free survey.