Fitting, replacement and upgrades · DD1
Manual to electric roller door conversion in Dundee
If your roller door in Dundee is in good condition but heavy to lift, a conversion may suit it. We survey homes in the DD1 area free of charge, check the power supply near the box, and quote any new fused spur separately.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Dundee, DD1, DD3 and DD4
- Area
- Dundee and Angus
Computer-generated image
What should I know about manual to electric roller door conversion in Dundee?
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
- Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
How does it work in Dundee?
Get a guide price online for converting your manual roller door. Then book a free survey at your home in Dundee.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Dundee?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Dundee and nearby
We survey and fit roller garage doors across Dundee, including DD1, DD3 and DD4, as part of our coverage in Dundee and Angus.
Other places close to Dundee that we cover include Carnoustie, St Andrews and Forfar.
Rules that apply in Dundee
Electrics
An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Dundee: questions
Can I get a price for Dundee without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
What do you check at a survey in DD1?
At a survey in DD1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Do you charge more for Dundee than other towns in Dundee and Angus?
No. Guide prices are the same for Dundee as for anywhere else we cover in Dundee and Angus. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Can I message you a photo of my garage in Dundee?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Dundee. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
How do I know if my manual roller door can be motorised?
The only reliable way is a survey. We check that the curtain runs smoothly, the laths are undamaged, and the barrel, box and guide rails are sound and compatible with a tubular motor. If they are, we quote for the conversion; if not, we explain why and price a new electric door so you can compare the two.
Is converting better value than buying a new electric door?
Compare the conversion price with the new-door prices on our prices page. A conversion keeps your existing curtain, barrel, box and guides, so it only makes sense when those parts are in good condition. If the door is worn, or you'd like insulated laths, a new electric door may be better value overall, and your quote can show both.
Other roller door services in Dundee
Electric doors in Dundee
Remotes and keypads in Dundee
Battery and safety in Dundee
Manual doors in Dundee
Smart doors in Dundee
Safety edge and photocells in Dundee
Colours and woodgrain in Dundee
Insulated doors in DundeeManual to electric roller door conversion in Dundee
See a guide price in four steps, then book a free survey.