Call 0800 088 6248

Fitting, replacement and upgrades · RM17

Manual to electric roller door conversion in Grays

If your roller door in Grays is in good condition but heavy to lift, a conversion may suit it. We survey homes in the RM17 area free of charge, check the power supply near the box, and quote any new fused spur separately.

Guide price
from £495 inc VAT
First step
Free survey
Covers
Grays, RM17, RM16 and RM20
Area
Essex
Gloved hands wiring a control unit beside a roller door guide railComputer-generated image

What should I know about manual to electric roller door conversion in Grays?

  • Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
  • Where there's no socket near the box, a qualified electrician fits a fused spur from an existing circuit, priced as a separate line.
  • The free survey checks that the curtain, barrel, box and guide rails are sound and compatible before anything is quoted.
  • A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.

How does it work in Grays?

Get a guide price online for converting your manual roller door. Then book a free survey at your home in Grays.

  1. STEP 01

    Guide price

    Answer a few quick questions online and see a price range for the conversion.

  2. STEP 02

    Free survey

    We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.

How much does manual to electric roller door conversion cost in Grays?

ItemGuide price (inc VAT)Ex VAT
Manual to electric conversion, fitted and commissioned£495–£895£412.50–£745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Grays and nearby

If your garage is in Grays (RM17, RM16 and RM20), you can get a guide price online now, and we confirm any survey or visit date in writing. Grays lies around 19 miles from Chelmsford.

Nearby, we also take enquiries from South Ockendon, Gravesend and Dartford.

Rules that apply in Grays

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Manual to electric roller door conversion in Grays: questions

Do you charge more for Grays than other towns in Essex?

No. Guide prices are the same for Grays as for anywhere else we cover in Essex. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I get a price for Grays without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you cover Grays?

Yes. Grays is part of the area we cover in Essex, including RM17, RM16 and RM20. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How much does manual to electric roller door conversion cost in Grays?

Our guide price for manual to electric roller door conversion is from £495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Grays as elsewhere we cover.

Do I need an electrician for a conversion?

An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.

Is converting better value than buying a new electric door?

Compare the conversion price with the new-door prices on our prices page. A conversion keeps your existing curtain, barrel, box and guides, so it only makes sense when those parts are in good condition. If the door is worn, or you'd like insulated laths, a new electric door may be better value overall, and your quote can show both.

Other roller door services in Grays

Manual to electric roller door conversion in Grays

See a guide price in four steps, then book a free survey.

CallGuide price