Manual to electric roller door conversion in Catford

At a survey in SE6 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.

Our guide price for manual to electric roller door conversion is from £495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Catford as elsewhere we cover.

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Not in the way you do now, because the motor holds the curtain in place. Most electric roller doors have a manual override, usually an internal crank or winding handle, for use in a power cut. A battery backup unit can also be added so the door runs for a limited number of cycles when the power is off.

Compare the conversion price with the new-door prices on our prices page. A conversion keeps your existing curtain, barrel, box and guides, so it only makes sense when those parts are in good condition. If the door is worn, or you'd like insulated laths, a new electric door may be better value overall, and your quote can show both.