Fitting, replacement and upgrades · SE9
Manual to electric roller door conversion in Eltham
Converting a roller door to electric in Eltham means more than adding a motor. Every door we convert for homes in Greater London gets safety devices, force testing to BS EN 12453 and a Declaration of Conformity at handover.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Eltham, SE9, SE12 and SE3
- Area
- Greater London
Computer-generated image
What should I know about manual to electric roller door conversion in Eltham?
- Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
- Where there's no socket near the box, a qualified electrician fits a fused spur from an existing circuit, priced as a separate line.
How does it work in Eltham?
We check the curtain, barrel, box, guides and power, and confirm whether the door can take a motor. You receive a written quote for the conversion, or for a new door if conversion isn't suitable.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Eltham?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Eltham and nearby
If your garage is in Eltham (SE9, SE12 and SE3), you can get a guide price online now, and we confirm any survey or visit date in writing. Eltham is about 9 miles from Westminster.
Nearby, we also take enquiries from Blackheath, Welling and Sidcup.
Rules that apply in Eltham
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Eltham: questions
Do I need permission for a new roller garage door in Eltham?
Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.
Can I get a price for Eltham without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Is an electric roller door worth it for a garage in Eltham?
That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Eltham garage so you can compare.
Do you cover Eltham?
Yes. Eltham is part of the area we cover in Greater London, including SE9, SE12 and SE3. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do I need an electrician for a conversion?
An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.
Is converting better value than buying a new electric door?
Compare the conversion price with the new-door prices on our prices page. A conversion keeps your existing curtain, barrel, box and guides, so it only makes sense when those parts are in good condition. If the door is worn, or you'd like insulated laths, a new electric door may be better value overall, and your quote can show both.
Other roller door services in Eltham
Electric doors in Eltham
Remotes and keypads in Eltham
Battery and safety in Eltham
Manual doors in Eltham
Smart doors in Eltham
Replacement in Eltham
Safety edge and photocells in Eltham
Installation in ElthamManual to electric roller door conversion in Eltham
See a guide price in four steps, then book a free survey.