Fitting, replacement and upgrades · TW13
Manual to electric roller door conversion in Feltham
Converting a roller door to electric in Feltham means more than adding a motor. Every door we convert for homes in Greater London gets safety devices, force testing to BS EN 12453 and a Declaration of Conformity at handover.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Feltham, TW13, TW14 and TW4
- Area
- Greater London
Computer-generated image
What should I know about manual to electric roller door conversion in Feltham?
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- Where there's no socket near the box, a qualified electrician fits a fused spur from an existing circuit, priced as a separate line.
- Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
How does it work in Feltham?
Once you accept, your fitting date is confirmed in writing and depends on installer availability. On the day the motor, controls and safety devices are fitted, tested and handed over with the paperwork.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Feltham?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Feltham and nearby
Our coverage in Greater London includes Feltham and the TW13, TW14 and TW4 postcode districts, so the same guide prices and written quotes apply here. For reference, Feltham sits roughly 12 miles from Westminster.
We also cover Hanworth (2 miles), Ashford (Surrey) (2 miles) and Hounslow (3 miles).
Rules that apply in Feltham
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Feltham: questions
Is an electric roller door worth it for a garage in Feltham?
That depends on how often you use the garage. An electric door opens from the car with a remote and has safety devices fitted, while a manual door costs less and suits occasional use. We price both for your Feltham garage so you can compare.
Do you charge more for Feltham than other towns in Greater London?
No. Guide prices are the same for Feltham as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Is the survey in Feltham really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
How much does manual to electric roller door conversion cost in Feltham?
Our guide price for manual to electric roller door conversion is from £495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Feltham as elsewhere we cover.
Do I need an electrician for a conversion?
An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.
What safety devices are added to a converted door?
A converted door gets a pressure-sensitive safety edge on the bottom rail and, where the risk assessment calls for them, photocells across the opening. These stop or reverse the door if it touches or detects an obstruction. After fitting, the closing force is tested to BS EN 12453, and you receive a Declaration of Conformity along with the rest of the handover paperwork.
Other roller door services in Feltham
Electric doors in Feltham
Remotes and keypads in Feltham
Battery and safety in Feltham
Manual doors in Feltham
Double and wide doors in Feltham
Replacement in Feltham
Safety edge and photocells in Feltham
Damaged laths in FelthamManual to electric roller door conversion in Feltham
See a guide price in four steps, then book a free survey.