Fitting, replacement and upgrades · IG1
Manual to electric roller door conversion in Ilford
If your roller door in Ilford is in good condition but heavy to lift, a conversion may suit it. We survey homes in the IG1 area free of charge, check the power supply near the box, and quote any new fused spur separately.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Ilford, IG1, IG2 and IG3
- Area
- Greater London
Computer-generated image
What should I know about manual to electric roller door conversion in Ilford?
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
- Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
- Where there's no socket near the box, a qualified electrician fits a fused spur from an existing circuit, priced as a separate line.
How does it work in Ilford?
We check the curtain, barrel, box, guides and power, and confirm whether the door can take a motor. You receive a written quote for the conversion, or for a new door if conversion isn't suitable.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Ilford?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Ilford and nearby
We take enquiries from across Ilford, from IG1 outwards, and confirm every price and date in writing before anything is ordered. Ilford is about 10 miles from Westminster.
Looking from a neighbouring town? We also cover East Ham (2 miles) and Barking (2 miles).
Rules that apply in Ilford
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Ilford: questions
What do you check at a survey in IG1?
At a survey in IG1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Do I need permission for a new roller garage door in Ilford?
Replacing a garage door is not usually development that needs planning permission in England, and widening the opening needs building control approval. If you live in a listed building, a conservation area or on an estate with covenants or planning conditions, check before ordering.
Do you charge more for Ilford than other towns in Greater London?
No. Guide prices are the same for Ilford as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Can I message you a photo of my garage in Ilford?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Ilford. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
What safety devices are added to a converted door?
A converted door gets a pressure-sensitive safety edge on the bottom rail and, where the risk assessment calls for them, photocells across the opening. These stop or reverse the door if it touches or detects an obstruction. After fitting, the closing force is tested to BS EN 12453, and you receive a Declaration of Conformity along with the rest of the handover paperwork.
How do I know if my manual roller door can be motorised?
The only reliable way is a survey. We check that the curtain runs smoothly, the laths are undamaged, and the barrel, box and guide rails are sound and compatible with a tubular motor. If they are, we quote for the conversion; if not, we explain why and price a new electric door so you can compare the two.
Other roller door services in Ilford
Electric doors in Ilford
Remotes and keypads in Ilford
Battery and safety in Ilford
Manual doors in Ilford
Colours and woodgrain in Ilford
Repairs in Ilford
Steel doors in Ilford
Vision and vent laths in IlfordManual to electric roller door conversion in Ilford
See a guide price in four steps, then book a free survey.