Fitting, replacement and upgrades · LE1
Manual to electric roller door conversion in Leicester
Manual to electric conversions in Leicester start with an honest check of your existing door. If it's sound, we quote for the conversion; if it isn't, we say so and price a new electric door instead. We cover LE1 postcodes with a free survey and written quote.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Leicester, LE1, LE4 and LE5
- Area
- Leicestershire
Computer-generated image
What should I know about manual to electric roller door conversion in Leicester?
- A manual override lets you open the converted door in a power cut, and a battery backup unit can be added.
- The free survey checks that the curtain, barrel, box and guide rails are sound and compatible before anything is quoted.
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
How does it work in Leicester?
Get a guide price online for converting your manual roller door. Then book a free survey at your home in Leicester.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Leicester?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Leicester and nearby
Across Leicester's LE postcode districts we survey, supply and fit roller garage doors, and repair existing ones, to the same process.
Nearby, we also take enquiries from Oadby, Wigston and Loughborough.
Rules that apply in Leicester
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Leicester: questions
Is the survey in Leicester really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
What do you check at a survey in LE1?
At a survey in LE1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Can I get a price for Leicester without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
How much does manual to electric roller door conversion cost in Leicester?
Our guide price for manual to electric roller door conversion is from £495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Leicester as elsewhere we cover.
How do I know if my manual roller door can be motorised?
The only reliable way is a survey. We check that the curtain runs smoothly, the laths are undamaged, and the barrel, box and guide rails are sound and compatible with a tubular motor. If they are, we quote for the conversion; if not, we explain why and price a new electric door so you can compare the two.
Do I need an electrician for a conversion?
An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.
Other roller door services in Leicester
Electric doors in Leicester
Remotes and keypads in Leicester
Battery and safety in Leicester
Manual doors in Leicester
Servicing in Leicester
Steel doors in Leicester
Smart doors in Leicester
Replacement in LeicesterManual to electric roller door conversion in Leicester
See a guide price in four steps, then book a free survey.