Fitting, replacement and upgrades · TS17
Manual to electric roller door conversion in Thornaby-on-Tees
If your roller door in Thornaby-on-Tees is in good condition but heavy to lift, a conversion may suit it. We survey homes in the TS17 area free of charge, check the power supply near the box, and quote any new fused spur separately.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Thornaby-on-Tees, TS17, TS18 and TS16
- Area
- North Yorkshire
Computer-generated image
What should I know about manual to electric roller door conversion in Thornaby-on-Tees?
- The free survey checks that the curtain, barrel, box and guide rails are sound and compatible before anything is quoted.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
- The engineer releases the spring tension and converts or replaces the barrel so a tubular motor can drive it, with a control box on the wall.
- Every converted door is force-tested to BS EN 12453 and handed over with a Declaration of Conformity.
How does it work in Thornaby-on-Tees?
Once you accept, your fitting date is confirmed in writing and depends on installer availability. On the day the motor, controls and safety devices are fitted, tested and handed over with the paperwork.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Thornaby-on-Tees?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Thornaby-on-Tees and nearby
We take enquiries from across Thornaby-on-Tees, from TS17 outwards, and confirm every price and date in writing before anything is ordered. Thornaby-on-Tees lies around 41 miles from York.
We also cover Stockton-on-Tees (2 miles), Billingham (4 miles) and Middlesbrough (4 miles).
Rules that apply in Thornaby-on-Tees
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Thornaby-on-Tees: questions
What do you check at a survey in TS17?
At a survey in TS17 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
Do you cover Thornaby-on-Tees?
Yes. Thornaby-on-Tees is part of the area we cover in North Yorkshire, including TS17, TS18 and TS16. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can I get a price for Thornaby-on-Tees without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Is the survey in Thornaby-on-Tees really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
Will I still be able to open the door by hand?
Not in the way you do now, because the motor holds the curtain in place. Most electric roller doors have a manual override, usually an internal crank or winding handle, for use in a power cut. A battery backup unit can also be added so the door runs for a limited number of cycles when the power is off.
How do I know if my manual roller door can be motorised?
The only reliable way is a survey. We check that the curtain runs smoothly, the laths are undamaged, and the barrel, box and guide rails are sound and compatible with a tubular motor. If they are, we quote for the conversion; if not, we explain why and price a new electric door so you can compare the two.
Other roller door services in Thornaby-on-Tees
Electric doors in Thornaby-on-Tees
Remotes and keypads in Thornaby-on-Tees
Battery and safety in Thornaby-on-Tees
Manual doors in Thornaby-on-Tees
Low-headroom doors in Thornaby-on-Tees
Steel doors in Thornaby-on-Tees
Stuck door repair in Thornaby-on-Tees
Double and wide doors in Thornaby-on-TeesManual to electric roller door conversion in Thornaby-on-Tees
See a guide price in four steps, then book a free survey.