Call 0800 088 6248

Fitting, replacement and upgrades · SR1

Manual to electric roller door conversion in Sunderland

Tired of lifting a manual roller door by hand in Sunderland? We can fit a tubular motor, controls and safety devices to a sound door for homes in Tyne and Wear, after a free survey that checks the curtain, barrel, box and guides are compatible.

Guide price
from £495 inc VAT
First step
Free survey
Covers
Sunderland, SR1, SR2 and SR4
Gloved hands wiring a control unit beside a roller door guide railComputer-generated image

What should I know about manual to electric roller door conversion in Sunderland?

  • The free survey checks that the curtain, barrel, box and guide rails are sound and compatible before anything is quoted.
  • If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
  • A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
  • Where there's no socket near the box, a qualified electrician fits a fused spur from an existing circuit, priced as a separate line.

How does it work in Sunderland?

Get a guide price online for converting your manual roller door. Then book a free survey at your home in Sunderland.

  1. STEP 01

    Guide price

    Answer a few quick questions online and see a price range for the conversion.

  2. STEP 02

    Free survey

    We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.

  3. STEP 03

    Written quote

    You get the price inc VAT, what is included and the payment stages in writing.

  4. STEP 04

    Fitting day

    Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.

How much does manual to electric roller door conversion cost in Sunderland?

ItemGuide price (inc VAT)Ex VAT
Manual to electric conversion, fitted and commissioned£495–£895£412.50–£745.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Sunderland and nearby

Our coverage in Tyne and Wear includes Sunderland and the SR1, SR2 and SR4 postcode districts, so the same guide prices and written quotes apply here. For reference, Sunderland sits roughly 10 miles from Newcastle upon Tyne.

Looking from a neighbouring town? We also cover Seaham (5 miles) and Washington (5 miles).

Rules that apply in Sunderland

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Manual to electric roller door conversion in Sunderland: questions

Can I get a price for Sunderland without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Can I message you a photo of my garage in Sunderland?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Sunderland. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Is the survey in Sunderland really free?

Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.

What do you check at a survey in SR1?

At a survey in SR1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.

What safety devices are added to a converted door?

A converted door gets a pressure-sensitive safety edge on the bottom rail and, where the risk assessment calls for them, photocells across the opening. These stop or reverse the door if it touches or detects an obstruction. After fitting, the closing force is tested to BS EN 12453, and you receive a Declaration of Conformity along with the rest of the handover paperwork.

Is converting better value than buying a new electric door?

Compare the conversion price with the new-door prices on our prices page. A conversion keeps your existing curtain, barrel, box and guides, so it only makes sense when those parts are in good condition. If the door is worn, or you'd like insulated laths, a new electric door may be better value overall, and your quote can show both.

Other roller door services in Sunderland

Manual to electric roller door conversion in Sunderland

See a guide price in four steps, then book a free survey.

CallGuide price