Fitting, replacement and upgrades · WR1
Manual to electric roller door conversion in Worcester
If your roller door in Worcester is in good condition but heavy to lift, a conversion may suit it. We survey homes in the WR1 area free of charge, check the power supply near the box, and quote any new fused spur separately.
- Guide price
- from £495 inc VAT
- First step
- Free survey
- Covers
- Worcester, WR1, WR2 and WR5
- Area
- Worcestershire
Computer-generated image
What should I know about manual to electric roller door conversion in Worcester?
- A safety edge on the bottom rail, and photocells where the risk assessment calls for them, stop or reverse the door on obstruction.
- If your door isn't suitable for a motor, we tell you plainly and price a new electric door for comparison.
- Where there's no socket near the box, a qualified electrician fits a fused spur from an existing circuit, priced as a separate line.
- The free survey checks that the curtain, barrel, box and guide rails are sound and compatible before anything is quoted.
How does it work in Worcester?
Get a guide price online for converting your manual roller door. Then book a free survey at your home in Worcester.
- STEP 01
Guide price
Answer a few quick questions online and see a price range for the conversion.
- STEP 02
Free survey
We check the curtain, barrel, box, guides and power, and confirm the door can take a motor.
- STEP 03
Written quote
You get the price inc VAT, what is included and the payment stages in writing.
- STEP 04
Fitting day
Motor, controls and safety devices fitted, the door commissioned and the paperwork handed over.
How much does manual to electric roller door conversion cost in Worcester?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Manual to electric conversion, fitted and commissioned | £495–£895 | £412.50–£745.83 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Worcester and nearby
We survey and fit roller garage doors across Worcester, including WR1, WR2 and WR5, as part of our coverage in Worcestershire.
Nearby, we also take enquiries from Droitwich, Malvern and Stourport-on-Severn.
Rules that apply in Worcester
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Manual to electric roller door conversion in Worcester: questions
Is the survey in Worcester really free?
Yes. For a new door, a replacement or a conversion, the survey is free and there is no obligation to go ahead. We measure the opening, check the lintel, headroom, side room and power, and send a written quote afterwards.
What do you check at a survey in WR1?
At a survey in WR1 we measure the width and height of the opening, the headroom above it for the roller box, the side room for the guide rails and the floor level. We also look at the lintel and where power can come from for an electric door.
How much does manual to electric roller door conversion cost in Worcester?
Our guide price for manual to electric roller door conversion is from £495 inc VAT. The figure for your garage depends on the opening size, the door specification and any extras, and is confirmed in a written quote after a free survey. The guide prices are the same in Worcester as elsewhere we cover.
Do you cover Worcester?
Yes. Worcester is part of the area we cover in Worcestershire, including WR1, WR2 and WR5. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
How do I know if my manual roller door can be motorised?
The only reliable way is a survey. We check that the curtain runs smoothly, the laths are undamaged, and the barrel, box and guide rails are sound and compatible with a tubular motor. If they are, we quote for the conversion; if not, we explain why and price a new electric door so you can compare the two.
Do I need an electrician for a conversion?
An electric door needs a power supply near the box, usually a fused spur or a socket. If you already have one in a suitable place, it can normally be used. If not, a qualified electrician fits a new fused spur, priced separately in your quote. In England and Wales some domestic electrical work is notifiable under Part P.
Other roller door services in Worcester
Electric doors in Worcester
Remotes and keypads in Worcester
Battery and safety in Worcester
Manual doors in Worcester
Low-headroom doors in Worcester
Colours and woodgrain in Worcester
Damaged laths in Worcester
Aluminium doors in WorcesterManual to electric roller door conversion in Worcester
See a guide price in four steps, then book a free survey.