Repairs and aftercare · DH9
Roller garage door motor replacement in Stanley
We replace roller garage door motors of any make in Stanley and across DH9 postcodes. Send us details of your control box and door size, and we'll confirm a compatible motor and the fitted price before the visit is booked.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Stanley, DH9
- Area
- County Durham
Computer-generated image
What should I know about roller garage door motor replacement in Stanley?
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
How does it work in Stanley?
Tell us what the roller door at your home in Stanley is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Stanley?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Stanley and nearby
Our coverage in County Durham includes Stanley and the DH9 postcode district, so the same guide prices and written quotes apply here. Stanley is about 8 miles from Durham.
Nearby, we also take enquiries from Chester-le-Street, Consett and Gateshead.
Rules that apply in Stanley
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Stanley: questions
Can I message you a photo of my garage in Stanley?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Stanley. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Do you cover Stanley?
Yes. Stanley is part of the area we cover in County Durham, including DH9. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Can I get a price for Stanley without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
How much is a visit in Stanley?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Stanley as elsewhere we cover.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Stanley
Repairs in Stanley
Stuck door repair in Stanley
Battery and safety in Stanley
Replacement in Stanley
Low-headroom doors in Stanley
Made-to-measure doors in Stanley
Security-rated doors in Stanley
Steel doors in StanleyRoller garage door motor replacement in Stanley
Tell us what you need and we confirm the visit price before anyone comes out.