Call 0800 088 6248

Repairs and aftercare · S18

Roller garage door motor replacement in Dronfield

If the electric roller door on your garage in Dronfield has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in Derbyshire, set the limits and test the safety devices, with the price agreed before we come out.

Guide price
from £395 inc VAT
First step
Visit price agreed first
Covers
Dronfield, S18, S17 and S8
Engineer on a step ladder working on the tubular motor inside an open roller boxComputer-generated image

What should I know about roller garage door motor replacement in Dronfield?

  • Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
  • Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
  • The open and closed limits are set after fitting, so the door stops fully open and fully closed.
  • Motors are matched to your barrel size and curtain weight, not just to the space inside the roller box.

How does it work in Dronfield?

Tell us what the roller door at your home in Dronfield is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.

  1. STEP 01

    Tell us about the door

    Describe the door and what you need, with a photo or video if you can.

  2. STEP 02

    Agree the visit price

    We confirm the visit price before anyone comes out.

  3. STEP 03

    Visit

    The engineer finds the cause and makes the door safe where possible.

  4. STEP 04

    Parts quoted first

    Any parts are quoted before they are fitted, so you decide.

How much does roller garage door motor replacement cost in Dronfield?

ItemGuide price (inc VAT)Ex VAT
Tubular motor replacement, fitted and commissioned£395–£695£329.17–£579.17 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Dronfield and nearby

We take enquiries from across Dronfield, from S18 outwards, and confirm every price and date in writing before anything is ordered. Dronfield lies around 26 miles from Derby.

Nearby, we also take enquiries from Chesterfield, Sheffield and Staveley.

Rules that apply in Dronfield

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage door motor replacement in Dronfield: questions

How much is a visit in Dronfield?

Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Dronfield as elsewhere we cover.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Can I message you a photo of my garage in Dronfield?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Dronfield. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you charge more for Dronfield than other towns in Derbyshire?

No. Guide prices are the same for Dronfield as for anywhere else we cover in Derbyshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Does a new motor change how the manual override works?

It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.

Can you replace the motor on any make of roller door?

We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.

Other roller door services in Dronfield

Roller garage door motor replacement in Dronfield

Tell us what you need and we confirm the visit price before anyone comes out.

CallGuide price