Repairs and aftercare · BH15
Roller garage door motor replacement in Poole
We replace roller garage door motors of any make in Poole and across BH15 postcodes. Send us details of your control box and door size, and we'll confirm a compatible motor and the fitted price before the visit is booked.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Poole, BH15, BH14 and BH17
- Area
- Dorset
Computer-generated image
What should I know about roller garage door motor replacement in Poole?
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
How does it work in Poole?
Tell us what the roller door at your home in Poole is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Poole?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Poole and nearby
If your garage is in Poole (BH15, BH14 and BH17), you can get a guide price online now, and we confirm any survey or visit date in writing. Poole lies around 20 miles from Dorchester.
Nearby, we also take enquiries from Bournemouth, Christchurch and Dorchester.
Rules that apply in Poole
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Poole: questions
How much is a visit in Poole?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Poole as elsewhere we cover.
Do you cover Poole?
Yes. Poole is part of the area we cover in Dorset, including BH15, BH14 and BH17. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Can I get a price for Poole without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Other roller door services in Poole
Repairs in Poole
Stuck door repair in Poole
Battery and safety in Poole
Replacement in Poole
Manual doors in Poole
Manual to electric in Poole
Installation in Poole
Remotes and keypads in PooleRoller garage door motor replacement in Poole
Tell us what you need and we confirm the visit price before anyone comes out.