Repairs and aftercare · GL5
Roller garage door motor replacement in Stroud
When a roller door motor fails in Stroud, the rest of the door may still be worth keeping. We'll check that for homes in Gloucestershire, and tell you plainly if worn guides, laths or a barrel mean a new door would make more sense.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Stroud, GL5 and GL6
- Area
- Gloucestershire
Computer-generated image
What should I know about roller garage door motor replacement in Stroud?
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
How does it work in Stroud?
Tell us what the roller door at your home in Stroud is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Stroud?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Stroud and nearby
We take enquiries from across Stroud, from GL5 outwards, and confirm every price and date in writing before anything is ordered. Stroud is about 8 miles from Gloucester.
We also cover Gloucester (8 miles), Cirencester (10 miles) and Cheltenham (12 miles).
Rules that apply in Stroud
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Stroud: questions
Can I get a price for Stroud without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you charge more for Stroud than other towns in Gloucestershire?
No. Guide prices are the same for Stroud as for anywhere else we cover in Gloucestershire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
How much is a visit in Stroud?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Stroud as elsewhere we cover.
Can I message you a photo of my garage in Stroud?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Stroud. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Other roller door services in Stroud
Roller garage door motor replacement in Stroud
Tell us what you need and we confirm the visit price before anyone comes out.
