Repairs and aftercare · DA5
Roller garage door motor replacement in Bexley
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Bexley and elsewhere in Greater London, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Bexley, DA5, DA6 and DA7
- Area
- Greater London
Computer-generated image
What should I know about roller garage door motor replacement in Bexley?
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- The engineer shows you how the manual override works on your new motor before handing the door back.
How does it work in Bexley?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Bexley?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Bexley and nearby
Bexley is within the area we cover in Greater London. Homes in DA5, DA6 and DA7 get the same survey, quote and fitting process as everywhere else we work. Bexley lies around 13 miles from Westminster.
Other places close to Bexley that we cover include Bexleyheath, Sidcup and Welling.
Rules that apply in Bexley
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Bexley: questions
Do you charge more for Bexley than other towns in Greater London?
No. Guide prices are the same for Bexley as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
How much is a visit in Bexley?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Bexley as elsewhere we cover.
What should I do while I wait for a visit in Bexley?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Bexley visit date is confirmed in writing.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Bexley
Repairs in Bexley
Stuck door repair in Bexley
Battery and safety in Bexley
Replacement in Bexley
Insulated doors in Bexley
Electric doors in Bexley
Made-to-measure doors in Bexley
Manual doors in BexleyRoller garage door motor replacement in Bexley
Tell us what you need and we confirm the visit price before anyone comes out.