Repairs and aftercare · CR5
Roller garage door motor replacement in Coulsdon
When a roller door motor fails in Coulsdon, the rest of the door may still be worth keeping. We'll check that for homes in Greater London, and tell you plainly if worn guides, laths or a barrel mean a new door would make more sense.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Coulsdon, CR5, CR8 and SM7
- Area
- Greater London
Computer-generated image
What should I know about roller garage door motor replacement in Coulsdon?
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
How does it work in Coulsdon?
Tell us what the roller door at your home in Coulsdon is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Coulsdon?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Coulsdon and nearby
Our coverage in Greater London includes Coulsdon and the CR5, CR8 and SM7 postcode districts, so the same guide prices and written quotes apply here. Coulsdon is about 12 miles from Westminster.
We also cover Purley (2 miles), Banstead (3 miles) and Wallington (3 miles).
Rules that apply in Coulsdon
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Coulsdon: questions
Do you repair roller doors you did not fit in Coulsdon?
Yes. We repair roller garage doors of any make in Coulsdon and across CR5, CR8 and SM7, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Do you cover Coulsdon?
Yes. Coulsdon is part of the area we cover in Greater London, including CR5, CR8 and SM7. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do you charge more for Coulsdon than other towns in Greater London?
No. Guide prices are the same for Coulsdon as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Coulsdon
Repairs in Coulsdon
Stuck door repair in Coulsdon
Battery and safety in Coulsdon
Replacement in Coulsdon
Remotes and keypads in Coulsdon
Damaged laths in Coulsdon
Vision and vent laths in Coulsdon
Manual to electric in CoulsdonRoller garage door motor replacement in Coulsdon
Tell us what you need and we confirm the visit price before anyone comes out.