Repairs and aftercare · TW13
Roller garage door motor replacement in Hanworth
Motor replacement in Hanworth includes fitting the new tubular motor inside your barrel, wiring it to the control box, setting the limits and pairing your controls. Homes in the TW13 area get the price in writing before anyone comes out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Hanworth, TW13, TW12 and TW2
- Area
- Greater London
Computer-generated image
What should I know about roller garage door motor replacement in Hanworth?
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- The engineer shows you how the manual override works on your new motor before handing the door back.
How does it work in Hanworth?
Tell us what the roller door at your home in Hanworth is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Hanworth?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Hanworth and nearby
Hanworth is within the area we cover in Greater London. Homes in TW13, TW12 and TW2 get the same survey, quote and fitting process as everywhere else we work. Hanworth is about 12 miles from Westminster.
Looking from a neighbouring town? We also cover Hampton (2 miles) and Feltham (2 miles).
Rules that apply in Hanworth
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Hanworth: questions
How much is a visit in Hanworth?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Hanworth as elsewhere we cover.
What should I do while I wait for a visit in Hanworth?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Hanworth visit date is confirmed in writing.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Do you repair roller doors you did not fit in Hanworth?
Yes. We repair roller garage doors of any make in Hanworth and across TW13, TW12 and TW2, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Hanworth
Repairs in Hanworth
Stuck door repair in Hanworth
Battery and safety in Hanworth
Replacement in Hanworth
Made-to-measure doors in Hanworth
Security-rated doors in Hanworth
Aluminium doors in Hanworth
Double and wide doors in HanworthRoller garage door motor replacement in Hanworth
Tell us what you need and we confirm the visit price before anyone comes out.