Call 0800 088 6248

Repairs and aftercare · RM12

Roller garage door motor replacement in Hornchurch

A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Hornchurch and elsewhere in Greater London, we can diagnose the problem first, then quote for a new motor only if it's needed.

Guide price
from £395 inc VAT
First step
Visit price agreed first
Covers
Hornchurch, RM12, RM11 and RM2
Engineer on a step ladder working on the tubular motor inside an open roller boxComputer-generated image

What should I know about roller garage door motor replacement in Hornchurch?

  • Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
  • If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
  • The engineer shows you how the manual override works on your new motor before handing the door back.
  • Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.

How does it work in Hornchurch?

We confirm the motor price, or a diagnostic visit if the cause isn't clear. The visit is booked once an engineer and the right motor are available, and the date is confirmed in writing.

  1. STEP 01

    Tell us about the door

    Describe the door and what you need, with a photo or video if you can.

  2. STEP 02

    Agree the visit price

    We confirm the visit price before anyone comes out.

  3. STEP 03

    Visit

    The engineer finds the cause and makes the door safe where possible.

  4. STEP 04

    Parts quoted first

    Any parts are quoted before they are fitted, so you decide.

How much does roller garage door motor replacement cost in Hornchurch?

ItemGuide price (inc VAT)Ex VAT
Tubular motor replacement, fitted and commissioned£395–£695£329.17–£579.17 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Hornchurch and nearby

Our coverage in Greater London includes Hornchurch and the RM12, RM11 and RM2 postcode districts, so the same guide prices and written quotes apply here. Hornchurch is about 16 miles from Westminster.

Looking from a neighbouring town? We also cover Romford (2 miles) and Dagenham (2 miles).

Rules that apply in Hornchurch

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage door motor replacement in Hornchurch: questions

Do you charge more for Hornchurch than other towns in Greater London?

No. Guide prices are the same for Hornchurch as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How much is a visit in Hornchurch?

Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Hornchurch as elsewhere we cover.

What should I do while I wait for a visit in Hornchurch?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Hornchurch visit date is confirmed in writing.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Why does my roller door motor hum but not move?

A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.

Will my old remotes work with the new motor?

Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.

Other roller door services in Hornchurch

Roller garage door motor replacement in Hornchurch

Tell us what you need and we confirm the visit price before anyone comes out.

CallGuide price