Call 0800 088 6248

Repairs and aftercare · W12

Roller garage door motor replacement in Shepherd's Bush

Motor replacement in Shepherd's Bush includes fitting the new tubular motor inside your barrel, wiring it to the control box, setting the limits and pairing your controls. Homes in the W12 area get the price in writing before anyone comes out.

Guide price
from £395 inc VAT
First step
Visit price agreed first
Covers
Shepherd's Bush, W12, W14 and W11
Engineer on a step ladder working on the tubular motor inside an open roller boxComputer-generated image

What should I know about roller garage door motor replacement in Shepherd's Bush?

  • Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
  • Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
  • The engineer shows you how the manual override works on your new motor before handing the door back.
  • The open and closed limits are set after fitting, so the door stops fully open and fully closed.

How does it work in Shepherd's Bush?

We confirm the motor price, or a diagnostic visit if the cause isn't clear. The visit is booked once an engineer and the right motor are available, and the date is confirmed in writing.

  1. STEP 01

    Tell us about the door

    Describe the door and what you need, with a photo or video if you can.

  2. STEP 02

    Agree the visit price

    We confirm the visit price before anyone comes out.

  3. STEP 03

    Visit

    The engineer finds the cause and makes the door safe where possible.

  4. STEP 04

    Parts quoted first

    Any parts are quoted before they are fitted, so you decide.

How much does roller garage door motor replacement cost in Shepherd's Bush?

ItemGuide price (inc VAT)Ex VAT
Tubular motor replacement, fitted and commissioned£395–£695£329.17–£579.17 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Shepherd's Bush and nearby

We take enquiries from across Shepherd's Bush, from W12 outwards, and confirm every price and date in writing before anything is ordered. Shepherd's Bush is about 4 miles from Westminster.

Nearby, we also take enquiries from Notting Hill, Chiswick and Fulham.

Rules that apply in Shepherd's Bush

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage door motor replacement in Shepherd's Bush: questions

How much is a visit in Shepherd's Bush?

Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Shepherd's Bush as elsewhere we cover.

Do you cover Shepherd's Bush?

Yes. Shepherd's Bush is part of the area we cover in Greater London, including W12, W14 and W11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you charge more for Shepherd's Bush than other towns in Greater London?

No. Guide prices are the same for Shepherd's Bush as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I message you a photo of my garage in Shepherd's Bush?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Shepherd's Bush. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Why does my roller door motor hum but not move?

A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.

Will my old remotes work with the new motor?

Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.

Other roller door services in Shepherd's Bush

Roller garage door motor replacement in Shepherd's Bush

Tell us what you need and we confirm the visit price before anyone comes out.

CallGuide price