Repairs and aftercare · UB8
Roller garage door motor replacement in Uxbridge
Motor replacement in Uxbridge includes fitting the new tubular motor inside your barrel, wiring it to the control box, setting the limits and pairing your controls. Homes in the UB8 area get the price in writing before anyone comes out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Uxbridge, UB8, UB10 and UB9
- Area
- Greater London
Computer-generated image
What should I know about roller garage door motor replacement in Uxbridge?
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- Motors are matched to your barrel size and curtain weight, not just to the space inside the roller box.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- The engineer shows you how the manual override works on your new motor before handing the door back.
How does it work in Uxbridge?
Tell us what the roller door at your home in Uxbridge is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Uxbridge?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Uxbridge and nearby
Uxbridge is within the area we cover in Greater London. Homes in UB8, UB10 and UB9 get the same survey, quote and fitting process as everywhere else we work. Uxbridge lies around 15 miles from Westminster.
We also cover Ruislip (3 miles), Hayes (3 miles) and Gerrards Cross (4 miles).
Rules that apply in Uxbridge
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Uxbridge: questions
Can I get a price for Uxbridge without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you cover Uxbridge?
Yes. Uxbridge is part of the area we cover in Greater London, including UB8, UB10 and UB9. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do you charge more for Uxbridge than other towns in Greater London?
No. Guide prices are the same for Uxbridge as for anywhere else we cover in Greater London. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
How much is a visit in Uxbridge?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Uxbridge as elsewhere we cover.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Uxbridge
Repairs in Uxbridge
Stuck door repair in Uxbridge
Battery and safety in Uxbridge
Replacement in Uxbridge
Electric doors in Uxbridge
Smart doors in Uxbridge
Safety edge and photocells in Uxbridge
Manual to electric in UxbridgeRoller garage door motor replacement in Uxbridge
Tell us what you need and we confirm the visit price before anyone comes out.