Repairs and aftercare · WN7
Roller garage door motor replacement in Leigh
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Leigh and elsewhere in Greater Manchester, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Leigh, WN7, M46 and M29
Computer-generated image
What should I know about roller garage door motor replacement in Leigh?
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
How does it work in Leigh?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Leigh?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Leigh and nearby
We take enquiries from across Leigh, from WN7 outwards, and confirm every price and date in writing before anything is ordered. Leigh is about 12 miles from Manchester.
We also cover Atherton (2 miles), Tyldesley (2 miles) and Golborne (3 miles).
Rules that apply in Leigh
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Leigh: questions
What should I do while I wait for a visit in Leigh?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Leigh visit date is confirmed in writing.
Do you repair roller doors you did not fit in Leigh?
Yes. We repair roller garage doors of any make in Leigh and across WN7, M46 and M29, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Can I get a price for Leigh without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
How much is a visit in Leigh?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Leigh as elsewhere we cover.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Other roller door services in Leigh
Repairs in Leigh
Stuck door repair in Leigh
Battery and safety in Leigh
Replacement in Leigh
Low-headroom doors in Leigh
Remotes and keypads in Leigh
Installation in Leigh
Damaged laths in LeighRoller garage door motor replacement in Leigh
Tell us what you need and we confirm the visit price before anyone comes out.