Call 0800 088 6248

Repairs and aftercare · M33

Roller garage door motor replacement in Sale

If the electric roller door on your garage in Sale has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in Greater Manchester, set the limits and test the safety devices, with the price agreed before we come out.

Guide price
from £395 inc VAT
First step
Visit price agreed first
Covers
Sale, M33, M32 and M21
Engineer on a step ladder working on the tubular motor inside an open roller boxComputer-generated image

What should I know about roller garage door motor replacement in Sale?

  • The engineer shows you how the manual override works on your new motor before handing the door back.
  • If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
  • Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
  • Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.

How does it work in Sale?

Tell us what the roller door at your home in Sale is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.

  1. STEP 01

    Tell us about the door

    Describe the door and what you need, with a photo or video if you can.

  2. STEP 02

    Agree the visit price

    We confirm the visit price before anyone comes out.

  3. STEP 03

    Visit

    The engineer finds the cause and makes the door safe where possible.

  4. STEP 04

    Parts quoted first

    Any parts are quoted before they are fitted, so you decide.

How much does roller garage door motor replacement cost in Sale?

ItemGuide price (inc VAT)Ex VAT
Tubular motor replacement, fitted and commissioned£395–£695£329.17–£579.17 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Sale and nearby

We take enquiries from across Sale, from M33 outwards, and confirm every price and date in writing before anything is ordered. For reference, Sale sits roughly 5 miles from Manchester.

Looking from a neighbouring town? We also cover Stretford (2 miles) and Urmston (2 miles).

Rules that apply in Sale

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Roller garage door motor replacement in Sale: questions

Do you cover Sale?

Yes. Sale is part of the area we cover in Greater Manchester, including M33, M32 and M21. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you repair roller doors you did not fit in Sale?

Yes. We repair roller garage doors of any make in Sale and across M33, M32 and M21, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you charge more for Sale than other towns in Greater Manchester?

No. Guide prices are the same for Sale as for anywhere else we cover in Greater Manchester. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I get a price for Sale without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Will my old remotes work with the new motor?

Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.

Should I replace the motor or the whole door?

Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.

Other roller door services in Sale

Roller garage door motor replacement in Sale

Tell us what you need and we confirm the visit price before anyone comes out.

CallGuide price