Repairs and aftercare · SK1
Roller garage door motor replacement in Stockport
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Stockport and elsewhere in Greater Manchester, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Stockport, SK1, SK3 and SK4
Computer-generated image
What should I know about roller garage door motor replacement in Stockport?
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- The engineer shows you how the manual override works on your new motor before handing the door back.
How does it work in Stockport?
Tell us what the roller door at your home in Stockport is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Stockport?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Stockport and nearby
If your garage is in Stockport (SK1, SK3 and SK4), you can get a guide price online now, and we confirm any survey or visit date in writing. Stockport is about 6 miles from Manchester.
Other places close to Stockport that we cover include Hazel Grove, Cheadle Hulme and Denton.
Rules that apply in Stockport
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Stockport: questions
Can I get a price for Stockport without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you cover Stockport?
Yes. Stockport is part of the area we cover in Greater Manchester, including SK1, SK3 and SK4. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do you repair roller doors you did not fit in Stockport?
Yes. We repair roller garage doors of any make in Stockport and across SK1, SK3 and SK4, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
What should I do while I wait for a visit in Stockport?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Stockport visit date is confirmed in writing.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Stockport
Repairs in Stockport
Stuck door repair in Stockport
Battery and safety in Stockport
Replacement in Stockport
Vision and vent laths in Stockport
Installation in Stockport
Security-rated doors in Stockport
Manual to electric in StockportRoller garage door motor replacement in Stockport
Tell us what you need and we confirm the visit price before anyone comes out.