Repairs and aftercare · LL57
Roller garage door motor replacement in Bangor (Gwynedd)
If the electric roller door on your garage in Bangor (Gwynedd) has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in Gwynedd, set the limits and test the safety devices, with the price agreed before we come out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Bangor (Gwynedd), LL57 and LL59
- Area
- Gwynedd
Computer-generated image
What should I know about roller garage door motor replacement in Bangor (Gwynedd)?
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- The engineer shows you how the manual override works on your new motor before handing the door back.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
How does it work in Bangor (Gwynedd)?
We confirm the motor price, or a diagnostic visit if the cause isn't clear. The visit is booked once an engineer and the right motor are available, and the date is confirmed in writing.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Bangor (Gwynedd)?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Bangor (Gwynedd) and nearby
If your garage is in Bangor (Gwynedd) (LL57 and LL59), you can get a guide price online now, and we confirm any survey or visit date in writing.
Looking from a neighbouring town? We also cover Llangefni (8 miles) and Caernarfon (8 miles).
Rules that apply in Bangor (Gwynedd)
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Bangor (Gwynedd): questions
Can I get a price for Bangor (Gwynedd) without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you charge more for Bangor (Gwynedd) than other towns in Gwynedd?
No. Guide prices are the same for Bangor (Gwynedd) as for anywhere else we cover in Gwynedd. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do you cover Bangor (Gwynedd)?
Yes. Bangor (Gwynedd) is part of the area we cover in Gwynedd, including LL57 and LL59. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
What should I do while I wait for a visit in Bangor (Gwynedd)?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Bangor (Gwynedd) visit date is confirmed in writing.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Bangor (Gwynedd)
Repairs in Bangor
Stuck door repair in Bangor
Battery and safety in Bangor
Replacement in Bangor
Aluminium doors in Bangor
Safety edge and photocells in Bangor
Steel doors in Bangor
Insulated doors in BangorRoller garage door motor replacement in Bangor (Gwynedd)
Tell us what you need and we confirm the visit price before anyone comes out.