Repairs and aftercare · GU11
Roller garage door motor replacement in Aldershot
Motor replacement in Aldershot includes fitting the new tubular motor inside your barrel, wiring it to the control box, setting the limits and pairing your controls. Homes in the GU11 area get the price in writing before anyone comes out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Aldershot, GU11, GU12 and GU9
- Area
- Hampshire
Computer-generated image
What should I know about roller garage door motor replacement in Aldershot?
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- The engineer shows you how the manual override works on your new motor before handing the door back.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
How does it work in Aldershot?
Tell us what the roller door at your home in Aldershot is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Aldershot?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Aldershot and nearby
We take enquiries from across Aldershot, from GU11 outwards, and confirm every price and date in writing before anything is ordered. Aldershot lies around 27 miles from Winchester.
Other places close to Aldershot that we cover include Farnham, Farnborough and Fleet.
Rules that apply in Aldershot
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Aldershot: questions
Do you charge more for Aldershot than other towns in Hampshire?
No. Guide prices are the same for Aldershot as for anywhere else we cover in Hampshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
How much is a visit in Aldershot?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Aldershot as elsewhere we cover.
Can I get a price for Aldershot without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you cover Aldershot?
Yes. Aldershot is part of the area we cover in Hampshire, including GU11, GU12 and GU9. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Aldershot
Repairs in Aldershot
Stuck door repair in Aldershot
Battery and safety in Aldershot
Replacement in Aldershot
Damaged laths in Aldershot
Manual doors in Aldershot
Double and wide doors in Aldershot
Electric doors in AldershotRoller garage door motor replacement in Aldershot
Tell us what you need and we confirm the visit price before anyone comes out.