Repairs and aftercare · SO50
Roller garage door motor replacement in Eastleigh
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Eastleigh and elsewhere in Hampshire, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Eastleigh, SO50, SO53 and SO18
- Area
- Hampshire
Computer-generated image
What should I know about roller garage door motor replacement in Eastleigh?
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
How does it work in Eastleigh?
Tell us what the roller door at your home in Eastleigh is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Eastleigh?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Eastleigh and nearby
If your garage is in Eastleigh (SO50, SO53 and SO18), you can get a guide price online now, and we confirm any survey or visit date in writing. Eastleigh lies around 7 miles from Winchester.
Other places close to Eastleigh that we cover include Southampton, Winchester and Totton.
Rules that apply in Eastleigh
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Eastleigh: questions
Can I get a price for Eastleigh without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
What should I do while I wait for a visit in Eastleigh?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Eastleigh visit date is confirmed in writing.
Do you charge more for Eastleigh than other towns in Hampshire?
No. Guide prices are the same for Eastleigh as for anywhere else we cover in Hampshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Other roller door services in Eastleigh
Repairs in Eastleigh
Stuck door repair in Eastleigh
Battery and safety in Eastleigh
Replacement in Eastleigh
Aluminium doors in Eastleigh
Colours and woodgrain in Eastleigh
Insulated doors in Eastleigh
Electric doors in EastleighRoller garage door motor replacement in Eastleigh
Tell us what you need and we confirm the visit price before anyone comes out.