Repairs and aftercare · CT14
Roller garage door motor replacement in Deal
If the electric roller door on your garage in Deal has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in Kent, set the limits and test the safety devices, with the price agreed before we come out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Deal, CT14
- Area
- Kent
Computer-generated image
What should I know about roller garage door motor replacement in Deal?
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
How does it work in Deal?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Deal?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Deal and nearby
Deal is within the area we cover in Kent. Homes in CT14 get the same survey, quote and fitting process as everywhere else we work. For reference, Deal sits roughly 38 miles from Maidstone.
Nearby, we also take enquiries from Dover, Ramsgate and Broadstairs.
Rules that apply in Deal
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Deal: questions
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Do you charge more for Deal than other towns in Kent?
No. Guide prices are the same for Deal as for anywhere else we cover in Kent. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Can I get a price for Deal without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Do you repair roller doors you did not fit in Deal?
Yes. We repair roller garage doors of any make in Deal and across CT14, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Other roller door services in Deal
Repairs in Deal
Stuck door repair in Deal
Battery and safety in Deal
Replacement in Deal
Safety edge and photocells in Deal
Servicing in Deal
Vision and vent laths in Deal
Made-to-measure doors in DealRoller garage door motor replacement in Deal
Tell us what you need and we confirm the visit price before anyone comes out.