Repairs and aftercare · G74
Roller garage door motor replacement in East Kilbride
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in East Kilbride and elsewhere in Lanarkshire, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- East Kilbride, G74 and G75
- Area
- Lanarkshire
Computer-generated image
What should I know about roller garage door motor replacement in East Kilbride?
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
How does it work in East Kilbride?
Tell us what the roller door at your home in East Kilbride is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in East Kilbride?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering East Kilbride and nearby
East Kilbride is within the area we cover in Lanarkshire. Homes in G74 and G75 get the same survey, quote and fitting process as everywhere else we work. For reference, East Kilbride sits roughly 6 miles from Hamilton.
Looking from a neighbouring town? We also cover Cambuslang (3 miles) and Castlemilk (4 miles).
Rules that apply in East Kilbride
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.
Roller garage door motor replacement in East Kilbride: questions
What should I do while I wait for a visit in East Kilbride?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your East Kilbride visit date is confirmed in writing.
How much is a visit in East Kilbride?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in East Kilbride as elsewhere we cover.
Can I message you a photo of my garage in East Kilbride?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for East Kilbride. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Do you charge more for East Kilbride than other towns in Lanarkshire?
No. Guide prices are the same for East Kilbride as for anywhere else we cover in Lanarkshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Other roller door services in East Kilbride
Repairs in East Kilbride
Stuck door repair in East Kilbride
Battery and safety in East Kilbride
Replacement in East Kilbride
Smart doors in East Kilbride
Installation in East Kilbride
Remotes and keypads in East Kilbride
Safety edge and photocells in East KilbrideRoller garage door motor replacement in East Kilbride
Tell us what you need and we confirm the visit price before anyone comes out.