Repairs and aftercare · TS17
Roller garage door motor replacement in Thornaby-on-Tees
When a roller door motor fails in Thornaby-on-Tees, the rest of the door may still be worth keeping. We'll check that for homes in North Yorkshire, and tell you plainly if worn guides, laths or a barrel mean a new door would make more sense.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Thornaby-on-Tees, TS17, TS18 and TS16
- Area
- North Yorkshire
Computer-generated image
What should I know about roller garage door motor replacement in Thornaby-on-Tees?
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- Motors are matched to your barrel size and curtain weight, not just to the space inside the roller box.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
How does it work in Thornaby-on-Tees?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Thornaby-on-Tees?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Thornaby-on-Tees and nearby
We survey and fit roller garage doors across Thornaby-on-Tees, including TS17, TS18 and TS16, as part of our coverage in North Yorkshire. Thornaby-on-Tees is about 41 miles from York.
We also cover Stockton-on-Tees (2 miles), Billingham (4 miles) and Middlesbrough (4 miles).
Rules that apply in Thornaby-on-Tees
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Thornaby-on-Tees: questions
Can I message you a photo of my garage in Thornaby-on-Tees?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Thornaby-on-Tees. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Do you charge more for Thornaby-on-Tees than other towns in North Yorkshire?
No. Guide prices are the same for Thornaby-on-Tees as for anywhere else we cover in North Yorkshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
How much is a visit in Thornaby-on-Tees?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Thornaby-on-Tees as elsewhere we cover.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Other roller door services in Thornaby-on-Tees
Repairs in Thornaby-on-Tees
Stuck door repair in Thornaby-on-Tees
Battery and safety in Thornaby-on-Tees
Replacement in Thornaby-on-Tees
Insulated doors in Thornaby-on-Tees
Up-and-over conversion in Thornaby-on-Tees
Smart doors in Thornaby-on-Tees
Aluminium doors in Thornaby-on-TeesRoller garage door motor replacement in Thornaby-on-Tees
Tell us what you need and we confirm the visit price before anyone comes out.