Repairs and aftercare · PH1
Roller garage door motor replacement in Perth
We replace roller garage door motors of any make in Perth and across PH1 postcodes. Send us details of your control box and door size, and we'll confirm a compatible motor and the fitted price before the visit is booked.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Perth, PH1 and PH2
Computer-generated image
What should I know about roller garage door motor replacement in Perth?
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
How does it work in Perth?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Perth?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Perth and nearby
We take enquiries from across Perth, from PH1 outwards, and confirm every price and date in writing before anything is ordered.
We also cover Kinross (13 miles), Blairgowrie (14 miles) and Crieff (16 miles).
Rules that apply in Perth
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.
Roller garage door motor replacement in Perth: questions
Can I message you a photo of my garage in Perth?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Perth. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
How much is a visit in Perth?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Perth as elsewhere we cover.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Do you charge more for Perth than other towns in Perth and Kinross?
No. Guide prices are the same for Perth as for anywhere else we cover in Perth and Kinross. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Other roller door services in Perth
Repairs in Perth
Stuck door repair in Perth
Battery and safety in Perth
Replacement in Perth
Insulated doors in Perth
Manual doors in Perth
Safety edge and photocells in Perth
Steel doors in PerthRoller garage door motor replacement in Perth
Tell us what you need and we confirm the visit price before anyone comes out.