Repairs and aftercare · LD3
Roller garage door motor replacement in Brecon
Motor replacement in Brecon includes fitting the new tubular motor inside your barrel, wiring it to the control box, setting the limits and pairing your controls. Homes in the LD3 area get the price in writing before anyone comes out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Brecon, LD3
- Area
- Powys
Computer-generated image
What should I know about roller garage door motor replacement in Brecon?
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- The engineer shows you how the manual override works on your new motor before handing the door back.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
How does it work in Brecon?
Tell us what the roller door at your home in Brecon is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Brecon?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Brecon and nearby
Our coverage in Powys includes Brecon and the LD3 postcode district, so the same guide prices and written quotes apply here. For reference, Brecon sits roughly 40 miles from Newtown.
Rules that apply in Brecon
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Brecon: questions
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Can I message you a photo of my garage in Brecon?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Brecon. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Do you repair roller doors you did not fit in Brecon?
Yes. We repair roller garage doors of any make in Brecon and across LD3, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
What should I do while I wait for a visit in Brecon?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Brecon visit date is confirmed in writing.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Brecon
Repairs in Brecon
Stuck door repair in Brecon
Battery and safety in Brecon
Replacement in Brecon
Safety edge and photocells in Brecon
Insulated doors in Brecon
Up-and-over conversion in Brecon
Installation in BreconRoller garage door motor replacement in Brecon
Tell us what you need and we confirm the visit price before anyone comes out.