Repairs and aftercare · CF64
Roller garage door motor replacement in Penarth
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Penarth and elsewhere in South Glamorgan, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Penarth, CF64, CF10 and CF11
- Area
- South Glamorgan
Computer-generated image
What should I know about roller garage door motor replacement in Penarth?
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
How does it work in Penarth?
We confirm the motor price, or a diagnostic visit if the cause isn't clear. The visit is booked once an engineer and the right motor are available, and the date is confirmed in writing.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Penarth?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Penarth and nearby
We take enquiries from across Penarth, from CF64 outwards, and confirm every price and date in writing before anything is ordered. For reference, Penarth sits roughly 3 miles from Cardiff.
Looking from a neighbouring town? We also cover Cardiff (3 miles) and Barry (6 miles).
Rules that apply in Penarth
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Penarth: questions
Do you cover Penarth?
Yes. Penarth is part of the area we cover in South Glamorgan, including CF64, CF10 and CF11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Can I get a price for Penarth without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
How much is a visit in Penarth?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Penarth as elsewhere we cover.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Why does my roller door motor hum but not move?
A humming motor that doesn't turn the barrel can mean the motor has failed, but it can also point to an obstruction, a curtain jammed in the guides or a fault in the control box. Stop pressing the button, keep clear of the door and don't force the curtain. A repair visit diagnoses the cause before any parts are quoted.
Other roller door services in Penarth
Repairs in Penarth
Stuck door repair in Penarth
Battery and safety in Penarth
Replacement in Penarth
Manual doors in Penarth
Installation in Penarth
Low-headroom doors in Penarth
Made-to-measure doors in PenarthRoller garage door motor replacement in Penarth
Tell us what you need and we confirm the visit price before anyone comes out.