Repairs and aftercare · NE31
Roller garage door motor replacement in Hebburn
If the electric roller door on your garage in Hebburn has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in Tyne and Wear, set the limits and test the safety devices, with the price agreed before we come out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Hebburn, NE31, NE32 and NE28
- Area
- Tyne and Wear
Computer-generated image
What should I know about roller garage door motor replacement in Hebburn?
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- The engineer shows you how the manual override works on your new motor before handing the door back.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
How does it work in Hebburn?
Tell us what the roller door at your home in Hebburn is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Hebburn?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Hebburn and nearby
Hebburn is within the area we cover in Tyne and Wear. Homes in NE31, NE32 and NE28 get the same survey, quote and fitting process as everywhere else we work. Hebburn is about 4 miles from Newcastle upon Tyne.
Looking from a neighbouring town? We also cover Jarrow (1 mile) and Wallsend (1 mile).
Rules that apply in Hebburn
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Hebburn: questions
Do you repair roller doors you did not fit in Hebburn?
Yes. We repair roller garage doors of any make in Hebburn and across NE31, NE32 and NE28, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
How much is a visit in Hebburn?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Hebburn as elsewhere we cover.
Can I message you a photo of my garage in Hebburn?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Hebburn. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Hebburn
Repairs in Hebburn
Stuck door repair in Hebburn
Battery and safety in Hebburn
Replacement in Hebburn
Steel doors in Hebburn
Double and wide doors in Hebburn
Damaged laths in Hebburn
Security-rated doors in HebburnRoller garage door motor replacement in Hebburn
Tell us what you need and we confirm the visit price before anyone comes out.