Repairs and aftercare · NE26
Roller garage door motor replacement in Whitley Bay
When a roller door motor fails in Whitley Bay, the rest of the door may still be worth keeping. We'll check that for homes in Tyne and Wear, and tell you plainly if worn guides, laths or a barrel mean a new door would make more sense.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Whitley Bay, NE26, NE30 and NE25
- Area
- Tyne and Wear
Computer-generated image
What should I know about roller garage door motor replacement in Whitley Bay?
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
How does it work in Whitley Bay?
Tell us what the roller door at your home in Whitley Bay is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Whitley Bay?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Whitley Bay and nearby
We take enquiries from across Whitley Bay, from NE26 outwards, and confirm every price and date in writing before anything is ordered. Whitley Bay is about 8 miles from Newcastle upon Tyne.
Other places close to Whitley Bay that we cover include North Shields, Tynemouth and South Shields.
Rules that apply in Whitley Bay
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Whitley Bay: questions
Do you cover Whitley Bay?
Yes. Whitley Bay is part of the area we cover in Tyne and Wear, including NE26, NE30 and NE25. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do you charge more for Whitley Bay than other towns in Tyne and Wear?
No. Guide prices are the same for Whitley Bay as for anywhere else we cover in Tyne and Wear. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
What should I do while I wait for a visit in Whitley Bay?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Whitley Bay visit date is confirmed in writing.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Other roller door services in Whitley Bay
Repairs in Whitley Bay
Stuck door repair in Whitley Bay
Battery and safety in Whitley Bay
Replacement in Whitley Bay
Installation in Whitley Bay
Made-to-measure doors in Whitley Bay
Remotes and keypads in Whitley Bay
Low-headroom doors in Whitley BayRoller garage door motor replacement in Whitley Bay
Tell us what you need and we confirm the visit price before anyone comes out.