Repairs and aftercare · CV12
Roller garage door motor replacement in Bedworth
When a roller door motor fails in Bedworth, the rest of the door may still be worth keeping. We'll check that for homes in Warwickshire, and tell you plainly if worn guides, laths or a barrel mean a new door would make more sense.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Bedworth, CV12 and CV11
- Area
- Warwickshire
Computer-generated image
What should I know about roller garage door motor replacement in Bedworth?
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- The engineer shows you how the manual override works on your new motor before handing the door back.
How does it work in Bedworth?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Bedworth?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Bedworth and nearby
We take enquiries from across Bedworth, from CV12 outwards, and confirm every price and date in writing before anything is ordered. For reference, Bedworth sits roughly 14 miles from Warwick.
We also cover Nuneaton (3 miles), Coventry (5 miles) and Hinckley (6 miles).
Rules that apply in Bedworth
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Bedworth: questions
Do you cover Bedworth?
Yes. Bedworth is part of the area we cover in Warwickshire, including CV12 and CV11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
Do you repair roller doors you did not fit in Bedworth?
Yes. We repair roller garage doors of any make in Bedworth and across CV12 and CV11, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Do you charge more for Bedworth than other towns in Warwickshire?
No. Guide prices are the same for Bedworth as for anywhere else we cover in Warwickshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
What should I do while I wait for a visit in Bedworth?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Bedworth visit date is confirmed in writing.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Other roller door services in Bedworth
Repairs in Bedworth
Stuck door repair in Bedworth
Battery and safety in Bedworth
Replacement in Bedworth
Installation in Bedworth
Smart doors in Bedworth
Low-headroom doors in Bedworth
Servicing in BedworthRoller garage door motor replacement in Bedworth
Tell us what you need and we confirm the visit price before anyone comes out.