Repairs and aftercare · SA12
Roller garage door motor replacement in Port Talbot
When a roller door motor fails in Port Talbot, the rest of the door may still be worth keeping. We'll check that for homes in West Glamorgan, and tell you plainly if worn guides, laths or a barrel mean a new door would make more sense.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Port Talbot, SA12 and SA13
- Area
- West Glamorgan
Computer-generated image
What should I know about roller garage door motor replacement in Port Talbot?
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
How does it work in Port Talbot?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Port Talbot?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Port Talbot and nearby
We survey and fit roller garage doors across Port Talbot, including SA12 and SA13, as part of our coverage in West Glamorgan. Port Talbot lies around 7 miles from Swansea.
Nearby, we also take enquiries from Neath, Maesteg and Swansea.
Rules that apply in Port Talbot
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in Wales some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Port Talbot: questions
What should I do while I wait for a visit in Port Talbot?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Port Talbot visit date is confirmed in writing.
Do you charge more for Port Talbot than other towns in West Glamorgan?
No. Guide prices are the same for Port Talbot as for anywhere else we cover in West Glamorgan. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Can I message you a photo of my garage in Port Talbot?
Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Port Talbot. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.
Can I get a price for Port Talbot without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Should I replace the motor or the whole door?
Replace the motor when the rest of the door is sound: the curtain runs straight, the laths are undamaged, and the guides and barrel are in good order. If several major parts are worn, or the door has other recurring faults, a new door may be better value. The engineer will tell you plainly what they find.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Port Talbot
Repairs in Port Talbot
Stuck door repair in Port Talbot
Battery and safety in Port Talbot
Replacement in Port Talbot
Insulated doors in Port Talbot
Smart doors in Port Talbot
Installation in Port Talbot
Vision and vent laths in Port TalbotRoller garage door motor replacement in Port Talbot
Tell us what you need and we confirm the visit price before anyone comes out.