Repairs and aftercare · LS27
Roller garage door motor replacement in Morley
A motor that hums, cuts out or won't turn the barrel isn't always the motor at fault. For homes in Morley and elsewhere in West Yorkshire, we can diagnose the problem first, then quote for a new motor only if it's needed.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Morley, LS27, LS11 and WF17
- Area
- West Yorkshire
Computer-generated image
What should I know about roller garage door motor replacement in Morley?
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
- The engineer shows you how the manual override works on your new motor before handing the door back.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- Where the cause of a stopped door is unclear, a diagnostic repair visit comes first, before any motor is ordered.
How does it work in Morley?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Morley?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Morley and nearby
If your garage is in Morley (LS27, LS11 and WF17), you can get a guide price online now, and we confirm any survey or visit date in writing. Morley is about 4 miles from Leeds.
Looking from a neighbouring town? We also cover Batley (3 miles) and Dewsbury (4 miles).
Rules that apply in Morley
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Morley: questions
Do you charge more for Morley than other towns in West Yorkshire?
No. Guide prices are the same for Morley as for anywhere else we cover in West Yorkshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do you repair roller doors you did not fit in Morley?
Yes. We repair roller garage doors of any make in Morley and across LS27, LS11 and WF17, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Can I get a price for Morley without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Other roller door services in Morley
Repairs in Morley
Stuck door repair in Morley
Battery and safety in Morley
Replacement in Morley
Installation in Morley
Up-and-over conversion in Morley
Smart doors in Morley
Low-headroom doors in MorleyRoller garage door motor replacement in Morley
Tell us what you need and we confirm the visit price before anyone comes out.