Repairs and aftercare · WF5
Roller garage door motor replacement in Ossett
If the electric roller door on your garage in Ossett has stopped because the motor has failed, we can replace it. We fit compatible tubular motors for homes in West Yorkshire, set the limits and test the safety devices, with the price agreed before we come out.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Ossett, WF5, WF12 and WF13
- Area
- West Yorkshire
Computer-generated image
What should I know about roller garage door motor replacement in Ossett?
- Safety edges and photocells are tested with the new motor, and the closing force is checked before handover.
- If your control box or receiver can't work with the new motor, a matching one is quoted before fitting.
- The engineer shows you how the manual override works on your new motor before handing the door back.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
How does it work in Ossett?
Tell us what the roller door at your home in Ossett is doing, and send photos of the control box and its label if you can. A rough width and height of the door helps too.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Ossett?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Ossett and nearby
Ossett is within the area we cover in West Yorkshire. Homes in WF5, WF12 and WF13 get the same survey, quote and fitting process as everywhere else we work. For reference, Ossett sits roughly 8 miles from Leeds.
Looking from a neighbouring town? We also cover Dewsbury (2 miles) and Batley (3 miles).
Rules that apply in Ossett
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Ossett: questions
What should I do while I wait for a visit in Ossett?
If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Ossett visit date is confirmed in writing.
Do you cover Ossett?
Yes. Ossett is part of the area we cover in West Yorkshire, including WF5, WF12 and WF13. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.
How much is a visit in Ossett?
Prices for roller garage door motor replacement start from £395 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Ossett as elsewhere we cover.
Do you charge more for Ossett than other towns in West Yorkshire?
No. Guide prices are the same for Ossett as for anywhere else we cover in West Yorkshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Does a new motor change how the manual override works?
It can. Different motors use different override arrangements, such as an internal crank or a winding handle. The engineer shows you how the override on your new motor works before leaving, and you should keep the handle somewhere you can find it in the dark. Our power-cut guide explains how overrides work in general.
Other roller door services in Ossett
Repairs in Ossett
Stuck door repair in Ossett
Battery and safety in Ossett
Replacement in Ossett
Steel doors in Ossett
Vision and vent laths in Ossett
Damaged laths in Ossett
Installation in OssettRoller garage door motor replacement in Ossett
Tell us what you need and we confirm the visit price before anyone comes out.