Repairs and aftercare · DY11
Roller garage door motor replacement in Kidderminster
When a roller door motor fails in Kidderminster, the rest of the door may still be worth keeping. We'll check that for homes in Worcestershire, and tell you plainly if worn guides, laths or a barrel mean a new door would make more sense.
- Guide price
- from £395 inc VAT
- First step
- Visit price agreed first
- Covers
- Kidderminster, DY11 and DY10
- Area
- Worcestershire
Computer-generated image
What should I know about roller garage door motor replacement in Kidderminster?
- The engineer shows you how the manual override works on your new motor before handing the door back.
- A compatible tubular motor is fitted inside your existing barrel and wired to the control box on the wall.
- Remotes and keypads are paired again after the motor is fitted, and each one is tested at the door.
- The open and closed limits are set after fitting, so the door stops fully open and fully closed.
How does it work in Kidderminster?
The motor is fitted, the limits are set and the door is tested. Any other parts the door needs are quoted before they're fitted.
- STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
- STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
- STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
- STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.
How much does roller garage door motor replacement cost in Kidderminster?
| Item | Guide price (inc VAT) | Ex VAT |
|---|---|---|
| Tubular motor replacement, fitted and commissioned | £395–£695 | £329.17–£579.17 + VAT |
Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.
Covering Kidderminster and nearby
Kidderminster is within the area we cover in Worcestershire. Homes in DY11 and DY10 get the same survey, quote and fitting process as everywhere else we work. Kidderminster is about 14 miles from Worcester.
Nearby, we also take enquiries from Stourport-on-Severn, Stourbridge and Kingswinford.
Rules that apply in Kidderminster
Powered door safety
Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.
Electrics
An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.
Roller garage door motor replacement in Kidderminster: questions
Do you charge more for Kidderminster than other towns in Worcestershire?
No. Guide prices are the same for Kidderminster as for anywhere else we cover in Worcestershire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.
Do you repair roller doors you did not fit in Kidderminster?
Yes. We repair roller garage doors of any make in Kidderminster and across DY11 and DY10, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.
Can I get a price for Kidderminster without anyone visiting?
Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.
Will you fix the door on the first visit?
A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.
Can you replace the motor on any make of roller door?
We replace tubular motors on electric roller garage doors of any make, provided a compatible motor is available for the barrel size and curtain weight. Send us details of the control box and the door size and we'll confirm before booking. If a matching motor isn't available, we'll explain the options, including a new control box or a new door.
Will my old remotes work with the new motor?
Sometimes. If your existing control box and receiver stay in place and are compatible, your handsets can be paired again. If the receiver has to change, new rolling-code handsets may be needed. We check this before the visit and include any handsets in the price we confirm, so the cost is clear before the day.
Other roller door services in Kidderminster
Repairs in Kidderminster
Stuck door repair in Kidderminster
Battery and safety in Kidderminster
Replacement in Kidderminster
Manual to electric in Kidderminster
Damaged laths in Kidderminster
Steel doors in Kidderminster
Manual doors in KidderminsterRoller garage door motor replacement in Kidderminster
Tell us what you need and we confirm the visit price before anyone comes out.