Repairs and aftercare · AB32

Safety edge and photocell repairs in Westhill

We replace safety edges and photocell pairs on electric roller garage doors of any make in Westhill and across AB32 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Westhill, AB32
Area: Aberdeen and Aberdeenshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Westhill?

After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.

How does it work in Westhill?

Tell us what the roller door at your home in Westhill is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Westhill?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Westhill and nearby

Westhill is within the area we cover in Aberdeen and Aberdeenshire. Homes in AB32 get the same survey, quote and fitting process as everywhere else we work. Westhill is about 7 miles from Aberdeen.

We also cover Aberdeen (7 miles), Inverurie (10 miles) and Stonehaven (13 miles).

Rules that apply in Westhill

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.

Safety edge and photocell repairs in Westhill: questions

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Can I message you a photo of my garage in Westhill?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Westhill. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you cover Westhill?

Yes. Westhill is part of the area we cover in Aberdeen and Aberdeenshire, including AB32. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can I get a price for Westhill without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.