Repairs and aftercare · KA12

Safety edge and photocell repairs in Irvine

For homes in Irvine and elsewhere in Ayrshire, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Irvine, KA12, KA11 and KA13
Area: Ayrshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Irvine?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Irvine?

Tell us what the roller door at your home in Irvine is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Irvine?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Irvine and nearby

If your garage is in Irvine (KA12, KA11 and KA13), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Irvine sits roughly 11 miles from Ayr.

Other places close to Irvine that we cover include Kilwinning, Troon and Kilmarnock.

Rules that apply in Irvine

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.

Safety edge and photocell repairs in Irvine: questions

Can I get a price for Irvine without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you charge more for Irvine than other towns in Ayrshire?

No. Guide prices are the same for Irvine as for anywhere else we cover in Ayrshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Do you repair roller doors you did not fit in Irvine?

Yes. We repair roller garage doors of any make in Irvine and across KA12, KA11 and KA13, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Can I message you a photo of my garage in Irvine?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Irvine. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.