Repairs and aftercare · CW7

Safety edge and photocell repairs in Winsford

A split safety edge or knocked photocell on your roller door in Winsford is worth fixing before the door is used again, because those devices stop it closing onto people, pets and cars. Homes in the CW7 area get the price agreed before booking.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Winsford, CW7
Area: Cheshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Winsford?

Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.
Wiping the photocell lenses and clearing the beam are safe checks to make before you request a visit.

How does it work in Winsford?

Tell us what the roller door at your home in Winsford is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Winsford?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Winsford and nearby

We survey and fit roller garage doors across Winsford, including CW7, as part of our coverage in Cheshire. For reference, Winsford sits roughly 15 miles from Chester.

Looking from a neighbouring town? We also cover Northwich (5 miles) and Crewe (7 miles).

Rules that apply in Winsford

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Winsford: questions

Do you cover Winsford?

Yes. Winsford is part of the area we cover in Cheshire, including CW7. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Do you charge more for Winsford than other towns in Cheshire?

No. Guide prices are the same for Winsford as for anywhere else we cover in Cheshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I get a price for Winsford without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Will you fix the door on the first visit?

A fault can sometimes be found and put right on the first visit, but we never promise it. If a part needs ordering, we quote for it first, make the door safe where we can, and confirm the return date in writing.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.

Why does my roller door reverse when nothing is in the way?

A door that reverses on its own while closing is often reacting to a safety device that thinks there's an obstruction. Dirty or misaligned photocells, a damaged safety edge, a loose cable or limits that have drifted can all cause it. Clean the photocell lenses and check the beam is clear, then request a visit if it continues.