Repairs and aftercare · DE11

Safety edge and photocell repairs in Swadlincote

For homes in Swadlincote and elsewhere in Derbyshire, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Swadlincote, DE11 and DE15
Area: Derbyshire

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Swadlincote?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.
Photocells can often be added to doors that only have a safety edge, if the control box allows it.

How does it work in Swadlincote?

Tell us what the roller door at your home in Swadlincote is doing and what you've checked. Photos of the bottom rail, photocells and control box label help.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Swadlincote?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Swadlincote and nearby

If your garage is in Swadlincote (DE11 and DE15), you can get a guide price online now, and we confirm any survey or visit date in writing. For reference, Swadlincote sits roughly 11 miles from Derby.

Looking from a neighbouring town? We also cover Burton upon Trent (4 miles) and Coalville (9 miles).

Rules that apply in Swadlincote

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Swadlincote: questions

Do you cover Swadlincote?

Yes. Swadlincote is part of the area we cover in Derbyshire, including DE11 and DE15. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How much is a visit in Swadlincote?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Swadlincote as elsewhere we cover.

Can I get a price for Swadlincote without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

Do you charge more for Swadlincote than other towns in Derbyshire?

No. Guide prices are the same for Swadlincote as for anywhere else we cover in Derbyshire. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.