Repairs and aftercare · DD11

Safety edge and photocell repairs in Arbroath

We replace safety edges and photocell pairs on electric roller garage doors of any make in Arbroath and across DD11 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Arbroath, DD11
Area: Dundee and Angus

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Arbroath?

After a repair, the door is tested to check it stops or reverses on obstruction before it's handed back.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
Never tape over, bridge or bypass a safety device to make an electric roller door close.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.

How does it work in Arbroath?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Arbroath?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Arbroath and nearby

Arbroath is within the area we cover in Dundee and Angus. Homes in DD11 get the same survey, quote and fitting process as everywhere else we work. Arbroath is about 16 miles from Dundee.

We also cover Carnoustie (6 miles), Montrose (12 miles) and Forfar (13 miles).

Rules that apply in Arbroath

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Part P does not apply in Scotland, but electrical work must meet BS 7671 and the Scottish building standards where it forms part of building work.

Safety edge and photocell repairs in Arbroath: questions

Do you charge more for Arbroath than other towns in Dundee and Angus?

No. Guide prices are the same for Arbroath as for anywhere else we cover in Dundee and Angus. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How much is a visit in Arbroath?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Arbroath as elsewhere we cover.

Do you repair roller doors you did not fit in Arbroath?

Yes. We repair roller garage doors of any make in Arbroath and across DD11, where parts are available. If a part is no longer made, we tell you what will fit instead, or price a replacement door if that is the better option.

Do you cover Arbroath?

Yes. Arbroath is part of the area we cover in Dundee and Angus, including DD11. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.