Repairs and aftercare · BN25

Safety edge and photocell repairs in Seaford

For homes in Seaford and elsewhere in East Sussex, we trace safety device faults through the whole circuit, from the device and its cable to the control box. Any parts beyond the ones agreed are quoted before they're fitted.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Seaford, BN25 and BN9
Area: East Sussex

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Seaford?

Never tape over, bridge or bypass a safety device to make an electric roller door close.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
The engineer tests the whole circuit, because a damaged cable or control box fault can look like a failed device.

How does it work in Seaford?

We confirm the visit price and the likely part before anything is booked. The visit date depends on engineer availability and is confirmed in writing.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Seaford?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Seaford and nearby

We take enquiries from across Seaford, from BN25 outwards, and confirm every price and date in writing before anything is ordered. Seaford lies around 11 miles from Brighton.

Other places close to Seaford that we cover include Rottingdean, Eastbourne and Hailsham.

Rules that apply in Seaford

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Seaford: questions

Can I message you a photo of my garage in Seaford?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Seaford. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

Do you charge more for Seaford than other towns in East Sussex?

No. Guide prices are the same for Seaford as for anywhere else we cover in East Sussex. The written quote reflects your opening and the door you choose, not your postcode, apart from islands and remote areas where any travel cost is shown in advance.

How much is a visit in Seaford?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Seaford as elsewhere we cover.

Do you cover Seaford?

Yes. Seaford is part of the area we cover in East Sussex, including BN25 and BN9. Get a guide price online, then we confirm a survey or visit date in writing. Dates depend on installer and engineer availability.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.

Can I bypass the photocells to get the door shut?

No. Bypassing, bridging or taping over a safety device removes the protection that stops the door closing onto a person, pet or car. If the door won't close, switch it off at the isolator, keep the area clear and request a visit. Tell us if you're concerned about security when you get in touch.