Repairs and aftercare · SS6

Safety edge and photocell repairs in Rayleigh

We replace safety edges and photocell pairs on electric roller garage doors of any make in Rayleigh and across SS6 postcodes. After fitting, the door is tested to check it stops or reverses as it should.

Request a visit Call 0800 088 6248

Guide price: from £99 inc VAT
First step: Visit price agreed first
Covers: Rayleigh, SS6, SS7 and SS5
Area: Essex

Rubber safety edge on a roller door bottom rail and a photocell sensor on the guide rail

Computer-generated image

What should I know about safety edge and photocell repairs in Rayleigh?

Photocells either side of the opening stop the door closing while anything is breaking the beam between them.
A pressure-sensitive safety edge on the bottom rail stops or reverses the door when it touches something while closing.
Replacement safety edges and photocell pairs have fitted prices, agreed before the visit is booked.
Never tape over, bridge or bypass a safety device to make an electric roller door close.

How does it work in Rayleigh?

The engineer tests the circuit and replaces the faulty device, then tests the door. Any further parts are quoted before they're fitted.

STEP 01
Tell us about the door
Describe the door and what you need, with a photo or video if you can.
STEP 02
Agree the visit price
We confirm the visit price before anyone comes out.
STEP 03
Visit
The engineer finds the cause and makes the door safe where possible.
STEP 04
Parts quoted first
Any parts are quoted before they are fitted, so you decide.

How much do safety edge and photocell repairs cost in Rayleigh?

Item	Guide price (inc VAT)	Ex VAT
Photocell pair replacement, fitted	£99–£189	£82.50–£157.50 + VAT
Safety edge replacement, fitted	£159–£295	£132.50–£245.83 + VAT

Guide prices for homes, last reviewed 25 October 2026. Your written quote is the price. See the full price list.

Covering Rayleigh and nearby

Rayleigh is within the area we cover in Essex. Homes in SS6, SS7 and SS5 get the same survey, quote and fitting process as everywhere else we work. Rayleigh lies around 12 miles from Chelmsford.

Nearby, we also take enquiries from South Benfleet, Wickford and Pitsea.

Rules that apply in Rayleigh

Powered door safety

Every powered door we fit is commissioned with force testing to BS EN 12453 and handed over with a Declaration of Conformity and UKCA or CE marking, as the Supply of Machinery (Safety) Regulations 2008 require.

Electrics

An electric door needs a power supply near the roller box. Electrical work must meet BS 7671, and in England some domestic electrical work is notifiable under Part P, so it is done by a registered competent person or signed off by building control.

Safety edge and photocell repairs in Rayleigh: questions

Can I message you a photo of my garage in Rayleigh?

Yes. Photos of the opening, the inside of the garage above the door and any existing door help us give a more useful guide price for Rayleigh. Send them by WhatsApp or mention them in your enquiry, and we will reply in writing.

What should I do while I wait for a visit in Rayleigh?

If the door is stuck part-open, keep people, pets and cars clear of it and switch off the power at the isolator if it is safe to reach. Do not force the curtain or open the roller box. Your Rayleigh visit date is confirmed in writing.

Can I get a price for Rayleigh without anyone visiting?

Yes. The guide price tool takes four steps and gives a range for your opening and door type. It is a guide, not a quote: the written quote comes after the survey or once the visit price is agreed.

How much is a visit in Rayleigh?

Prices for safety edge and photocell repairs start from £99 inc VAT, and the price is agreed before anyone comes out. Any parts not covered by that price are quoted before they are fitted, so you can decide on the spot. The guide prices are the same in Rayleigh as elsewhere we cover.

How do I test my safety edge and photocells?

Follow the manufacturer's instructions for your door. In general, the test checks that the door stops or reverses when the safety edge meets an obstruction while closing, and that the door won't close while the photocell beam is broken. Keep people and pets clear while testing, and repeat the test monthly.

Can photocells be added to a door that doesn't have them?

Often, if the control box has a connection for them. Some older systems need extra wiring or a replacement control box first. Tell us what's on the control box label and we'll confirm whether photocells can be added, and the price, before booking. Our battery backup and safety upgrades page covers adding devices.